ASSEMBL
Y AND
INST
ALLA
TION
13
6
6
ASSEMBLY AND INSTALLATION
• Perform assembly work by following the procedure herein stated. Failure to
comply with the instructions can cause electric shock.
• Perform assembly as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specified performance.
• When assembling, more than one person is required. Depending on the
assembly work, there are some cases in which working by one person alone can
cause personal injury or parts damage.
• Ensure that connectors are properly connected. Improper connections can
cause electric shock.
• Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a risk of fire.
• Do not unnecessarily push the display screen.
• This work should be carried out by site maintenance personnel or other
qualified professionals. Work performed by non-technical personnel can cause a
severe accident such as electric shock. Failing to comply with this instruction can
cause a severe accident such as electric shock to the player during operation. If
no one with proper technological expertise is available, request service from the
office indicated in this document or the point of purchase so as to ensure safety.
• Provide sufficient space so that assembling can be performed. Performing work
in places with narrow space or low ceiling may cause an accident and assembly
work to be difficult.
• To perform work safely and avoid serious accident such as the cabinet falling
down, do not perform work in places where step-like grade differences, a ditch,
or slope exist.
• This product does not use any connectors other than those connected to and
used by the game board when it leaves the factory. Do not needlessly connect
wires to unused connectors. This could lead to overheating, generation of smoke
and burn related injuries.
• Handle molded parts with care. Excessive weight or pressure may cause them
to break and the broken pieces may cause injury.
• To perform the operation safely and accurately you must use a safe, steady
footstool or stepladder. Working without this may lead to a fall and possible injury.
Summary of Contents for Double Spin
