Sega Double Spin Owner'S Manual Download

Page: 17 / 128

PRECAUTIONS REGARDING PRODUCT OPERA

TION

• It is recommended that wet towels (paper towels) be provided.

• To avoid electric shock, ensure that all covers and panels are undamaged

and fitted. Do not operate with covers removed.
• To avoid electric shock, short circuit and/or parts damage, do not put the

following items on or in the periphery of the product.

• Flower vases, flowerpots, cups, water tanks, cosmetics, and receptacles/

containers/vessels containing chemicals and water.

• To avoid injury, be sure to provide sufficient space by considering the

potentially crowded situation at the installation location. Insufficient installation

space can cause making bodily contact with each other, hitting accidents,

and/or trouble between customers.
• Everyday when cleaning the Controllers, inspect the controllers and make sure

that there are no cracks in the surface, and that the fastening screws are not

loose. If the game is played with cracks or loose screws, it can cause injuries

to the player.

Summary of Contents for Double Spin

































































































































Search results

Summary of Contents for Double Spin

Reviews:

Related manuals for Double Spin

Brands by name

Popular brands

Sega Double Spin, Owner'S Manual

Search results

Summary of Contents for Double Spin

Reviews:

Related manuals for Double Spin

Brands by name

Popular brands