SEGA ENTERPRISES 18 Wheeler American Pro Trucker, Owner'S Manual

Page: 80 / 146

76 www.seuservice.com
LINE CONVERGENCE ADJUSTMENT
In the LINE CONVERGENCE ADJUSTMENT, the adjustment point of the column line (verti-
cal) or row line (horizontal) is comprehensively moved for color matching. It is convenient to
utilize this adjustment when the color of the column line or row line is uniformly deviated.
TEST MODE WRITING
POSITION
ADJUST
SELECT
RESET
R B G
PIC-ADJ
SET
P
ADJUST MODE
ADJUST MODE
ADJUST MODE
ADJUST MODE
ADJUST MODE
ADJUST MODE
ADJUST MODE
WRITING
The screen changes to ADJUST
mode from the Game Board mode
and displays the green test pattern.
Keep pressing the TEST button for approximately
3 seconds.
Press the MODE button once to have the POINT
ADJUSTMENT mode.
Note 1
The crosshatch test pattern appears
and the vertically long MARKER
is shown.
The selected color is displayed by
superimposing on green. The
MARKER will be in the color
selected.
By using the POSITION buttons,
move the MARKER to the position to be adjusted.
Use the buttons to select
the column line, and the MARKER
moves in the right/left direction.
However, the movable range is
predetermined.
Use the buttons to select
the row line and the MARKER
moves in the up/down direction.
However, the movable range is
predetermined.
Make adjustment by using the
ADJUST buttons.
The selected column line or row
line (shown left is the column line)
can be moved in the desired up/
down or right/left directions as
applicable.
Press the WRITING button (for storing and finish).
WRITING is displayed and the
adjustment data is stored. After
the data is stored, the Game Board
screen returns.
- Using either R or B button, select the desired color to
be adjusted.
Note 2
Although the green color can also
be selected by using the G button, to avoid the screen
size change adjustment, do not choose green.
DO NOT
PUSH.
MARKER
Note 1 When the MODE button is repeatedly
pressed, the adjustment modes will
circulate as follows:
STATIC ADJUSTMENT MODE
LINE ADJUSTMENT MODE
POINT ADJUSTMENT MODE
Note 2 When either of the COLOR SELECT
buttons (R, B) is pressed, if the desired
color to be adjusted disappears, press
that particular button again.
1
2
3
4
5
6