SEGA ENTERPRISES 18 Wheeler American Pro Trucker Owner'S Manual Download

Page: 41 / 146

www.seuservice.com

Name of the destination point.

Indicates the player's playable time. Additional time will be added when passing the
CHECKPOINT and obtaining TIME BONUS.

Indicates the rear condition while DRIVER'S VEIW is being selected.

Indicates the fee you receive when you reach the destination. If you give damage to the
trailer by hitting another car, etc., the fee will be reduced.

Indicates speed of rotation.

Indicates the gear condition (4 positions in total) with the lamp on the monitor.

Indicates the current gear condition. The three types of gears (REVERSE • LOW • HI) are
available.

Summary of Contents for 18 Wheeler American Pro Trucker



















































































































































Search results

Summary of Contents for 18 Wheeler American Pro Trucker

Reviews:

Related manuals for 18 Wheeler American Pro Trucker

Brands by name

Popular brands

SEGA ENTERPRISES 18 Wheeler American Pro Trucker, Owner'S Manual

Search results

Summary of Contents for 18 Wheeler American Pro Trucker

Reviews:

Related manuals for 18 Wheeler American Pro Trucker

Brands by name

Popular brands