SEGA ENTERPRISES 18 Wheeler American Pro Trucker, Owner'S Manual

Page: 63 / 146

59
www.seuservice.com
Before starting to work, ensure that the Power SW is OFF. Failure to observe
this can cause electric shock or short circuit.
Use care so as not to damage wirings. Damaged wiring can cause electric
shock or short circuit.
Do not touch undesignated places. Touching places not designated can cause
electric shock or short circuit.
This work should be performed by the Location's Maintenance Man or
Serviceman. Performing work by non-technical personnel can cause electric
shock hazard.
When performing work such as parts replacement other than those specified
in this manual, be sure to contact where you purchased the product from.
Confirm the work procedures and obtain precautions from where you
purchased the product prior to performing work. Inappropriate parts
replacement and/or installation with erroneous adjustment can cause an
overload or the parts to come into contact, resulting in an electric shock, a
short circuit, and a fire.
If Accel. and Brake operation is not satisfactory, adjustment of volume installation position or
volume replacement is needed. Also, be sure to apply greasing to the gear mesh portion once
every 3 months.
After having performed adjustment or replacement of the volume, be sure to check
the variation of the volume value in the INPUT TEST in the test mode.
12. ACCELERATOR & BRAKE
12 - 1 REMOVING THE ACCELERATOR AND THE BRAKE
Remove the accelerator and the brake to perform maintenance. To remove the accelerator and
the brake, a socket wrench for M6 Hexagon bolts and an extension tool are necessary. The
wiring connector is inside the accelerator and the brake. When removing, use care so as not to
damage wiring.
Turn power off.
Apply the extension tool to
the socket wrench. Remove
the 4 Hexagon bolts which
secure the accelerator and
the brake.
The 2 wire connectors are
connected to the accelerator
and the brake. Disconnect
the connectors, and the
accelerator and the brake
can be removed. Since
work is performed inside the
energized cabinet, be very
careful so as not to touch
undesignated portions.
HEXAGON BOLT (4)
M6 X 25,black,w/spring washer
PHOTO 12. 1
STOP
IMPORTANT
1
2
3