manualshive.com logo in svg

SEF 548.10, Operating Manual

Share
Download
SEF 548.10 Operating Manual Download Page 38

Page 3.7

3.0 Quick Reference Guide

Quick Reference Guide for 548.10 G \ 05.2007 \

 Turn the System on and off

The system will be central switched on and off with the main 
switch beside the operating panel.

 

Turn the main switch to 

<ON>

.

On the LCD-Display you will get the system information.

                

SEF GmbH  Re

fl

 

ow-System 

548.10 

   

                                            (c) SEF GmbH 204
                                            Rev. 2.02

                  

The system screen appears.

The system starts with the last stored program. You will reach 
the submenus with the functions keys displayed in the foot line.

Turn the System on

On

The  System Screen

  Settings            Program            Measuring        Sy stem

HEATER 1 

 

V = 35 cm/min. 

        Prg.: 03

40°C                                                                   40°C

        210°C

 Not Ready                                                          548.10

Summary of Contents for 548.10








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands