with the green tab, then the side with red tab. Continue pushing on the ends of the tabs until
both sides click into the place.
4.1.4 Electricity
a.
Apply the power after checking the wire connection and polarity of the plug and outlet.
b.
Domes enter self-inspection, and carry out a default program when powered on, making a
horizontal 360°and tilt 90 °rotation. After the dome stops completely, the self-inspection is
completed and dome is ready to be controlled.
4.1.5 Dome Mounting
a.
Use soft cloth to wipe off dust and smudges of transparent dome, avoid scratching the
dome.
b.
Loose the two screws of the dome cover.
c.
Push
the dome into the case, aim at the mounting hole of screw, then fit on two screws.
4.2 Dome Camera Ceiling Installation
4.2.1 Holing On the Ceiling
a.
Draw a circle on the ceiling according to the size of the speed dome
b.
Use drill to cut a circle on the ceiling
4.2.2 Housing Installation
a.
Take out the housing from the carton and install the upper housing in the round hole of the
ceiling.
b.
Use screwdriver to rotate the bolt of the ring, making the ring stick to the ceiling in order to
connecting flange edge with the ceiling surface closely.
16
