2. Safety
SMF-MP10S User guide V1.1 Shanghai Seer Intelligent Technology Corporation
6
Do not use or store battery packs near the heat sources (such as fire or heaters).
Do not connect the positive and negative poles of the battery pack reversely.
Do not pierce the battery pack shell with nails or other sharp objects, and do not
hammer or step on the battery pack.
Do not remove or repair the battery pack in any way without authorization.
Do not hit, throw, or subject the battery pack to mechanical vibration or natural
dropping.
Do not mix battery packs of different types and brands.
If battery pack emits peculiar smell, is hot, deformed or discolored, or has any other
abnormal phenomenon, do not use it and move it out of the use environment.
If the battery pack catches fire, use dry powder fire extinguishers, foam fire
extinguishers, or sand etc. to put out the fire, and keep the battery pack away from the
environment.
2.5 Risk Assessment
The risk assessment is an important step for the Integrator to realize safe installation. The
on-site commissioning personnel are usually responsible for the risk assessment.
It is recommended to carry out the risk assessment with reference to the guidelines in ISO
12100, ISO 3691-4, ANSI B56.5 or other relevant standards, including but not limited to:
It shall be demonstrated in the robot installation, development and use process.
The robot equipment shall be working normally.
In paragraph 4 of ISO 3691-4, the major hazards, dangerous situations and events that need
to be paid attention to shall be listed.
The risk assessment items shall be listed in the technical agreement.
2.6 Residual Risk
The following lists the potential major hazards. Please operate the robot carefully.
The robot can be set with a route for moving backwards, but there is a risk of collision if
entering the running route of the robot when it moves backwards.
If the user accidentally touches the moving parts of the robot, there is a risk of being
pinched or collided.
There is a risk of being impacted and jammed when transporting the load.
2.7 Environmental Safety
2.7.1 Noise
The noise of SMF-
MP10S is ≤70
dB(A), which complies with EN12053 standard.
