Seepex BN 100-6LS Operating And Assembly Instruction Manual Download Page 49

Page: 49 / 70

Dismantling/reassembly

Ausgabe
issue

A / 05.12.2012

Dokument
document

OM.PJT.21e

Blatt
sheet

3 (5)

9.2.3 Rotating unit (RTE) – component parts – mounting

9.2.3.1 Rotor head (640) – coupling rod (400) – connecting

Mount retaining sleeve (401) on rotor side

Rotor (600) unhardened material

Rotor (600) hardened material

NOTICE

Malfunction of the joints.

Malfunction and/or destruction of joints.



Replace coupling rod pins (402) and guide bushings (403) jointly.



Fill rotor head (640) with joint grease (GF).



Slide the rotor head (640) onto the cou-
pling rod (400).



Push on retaining sleeve (401).



Insert coupling rod pin (402).

Tool (W5/drift)



Slide in the coupling rod pins (402).



Knock the guide bushings (403) in.

–

Use tool (W5).

Tool (W4/assembly mandrel)



Knock back retaining sleeve (401).

–

Use tool (W4).



Secure retaining sleeve (401) in a dis-
placed manner (2x180°).

–

Use suitable tool (WK).



Secure retaining sleeve (401) in a dis-
placed manner (2x180°).

–

Use suitable tool (WK).

Summary of Contents for BN 100-6LS







































































Search results

Summary of Contents for BN 100-6LS

Reviews:

Related manuals for BN 100-6LS

Brands by name

Popular brands

Seepex BN 100-6LS, Operating And Assembly Instruction Manual

Search results

Summary of Contents for BN 100-6LS

Reviews:

Related manuals for BN 100-6LS

Brands by name

Popular brands