After your initial calibration, you can
calibrate by clicking the "Auto Delta
Calibration" button, or by sending
"G32" in the gcode console. We
highly recommend probing with the
bed cold. FSR's get finicky with
temperature increases and the
thermal expansion of the bed is so
minimal as to be non-existent.
You might see a line or two that
says the Height Error Difference was
above the maximum tolerance. Don't
worry about them unless you see a
lot of them.
Configuring Artemis
© 2018
seemecnc.dozuki.com/
Page 8 of 11
