Step 9 — Printing!
Upload and print your first gcode
file. You can do this two different
ways. You can either click "Upload &
Print" at the top of the page, or click
on G-Code files at the side of the
page, then "Upload G-Code File(s)",
then select your file from the list.
If you'd like a pre-sliced file for your
first print,
NOTE: On the first heatup of your
bed, you may notice a small amount
of smoke from the bed / base of the
printer. This is nothing to worry
about, this is excess residue on the
silicone bed from the manufacturing
process. We cycle every bed at
SeeMeCNC before shipping to
reduce / eliminate this issue, but
some are more determined than
others.
Configuring Artemis
© 2018
seemecnc.dozuki.com/
Page 10 of 11
