Release Version 1.1
1
Precaution and Safety Guidelines
The content of this guideline is intended to protect user safety and prevent property damage.
Please read these operating instructions carefully and use the device properly.
Warning
(If you do not keep any of the below guidelines, you may get seriously injured
or cause somebody’s death.)
■ Be sure to install the product after unplugging power cord. Also, do not use many power plugs at the
same time.
- It may cause abnormal heat, fire and electric shock.
■ Do not leave the device in a place where water will fall or splash. Also, do not place anything with water
on it, such as a vase of flowers.
- A malfunction or fire may result if liquid gets inside the device
■ Do not bend the power cord by excessive force. Make sure the power cord is not crushed by heavy
things.
- It may cause fire.
■ Do not open the lid arbitrarily as this device has high voltage part inside. Never disassemble, repair or
modify it.
- Abnormal work could result in fire, electric shock, and injury.
■ Do not install this product in places with high humidity, dust, or soot.
- It may cause electric shock and fire.
■ Do not tug at the power cord section or unplug the power plug with wet hands. If the power cord is
loose, do not plug in.
- There may be a risk of fire and electric shock.
■ Always keep the location clean and dust-free during or after installing the device. When cleaning the
device, be sure to wipe it with a dry towel and do not use water, thinner, or organic solvents.
- It may cause malfunction or fire
■ Keep the device in a cool place where doesn’t let direct sunlight. Keep it at a proper temperature and
avoid heating appliances like candle or heater. Also, keep the equipment or tools away from places where
people come and go.
- There is a risk of damage to the surface of the device and a risk of failure, electric shock or fire.
■ Pay attention to possible hazards in the workplace, such as wet floor, ungrounded power extension
cables, old power cords and a lack of safety earth. Consult your place of purchase or professional if
problems arise.
- It may cause fire and electric shock.
■ Keep the back of the product more than 15 cm and the sides more than 5 cm from the wall. Installing
the product too close to the wall may bend, compress too much, or break the cable as various external
input / output connectors such as power cords protrude from the back of the product.
- It may cause fire, electric shock and personal injury.
■ Concerning the input voltage for operating this device, a voltage range must be within 10% of rated
voltage. Also, do not use a heat source such as a hair dryer, iron and refrigerator to the same power unit.
- It may cause abnormal heat, fire and electric shock.
