Release Version 1.1
4
3. Name and function of each part
3-1. SC-IPR0708H(Receiver)
①
POWER:
Power ON/OFF switch
②
1~8-channel Status LED:
View the power status of each channel and the Link / Act information
Name
Status
Status Description
PoC
On
Each channel's power input works
Blinking
Power supply problem on the transmitter side of each
channel (short circuit, disconnection, overcurrent)
Off
No power input for each channel
LINK/ACT
Blinking
LINK/ACT of each channel works
Off
LINK/ACT of each channel is not connected
③
UpLink Status LED:
The Link & ACT information of the NVR will be displayed.
ETHERNET
STATUS
Name
Status Description
LINK
light on: Successful Ethernet connection
lights off: No Ethernet connection
ACT
light on: Successful Ethernet data transmission
lights off: No Ethernet data
④
Transmission distance extension switch (Bandwidth):
100Mbps/10Mbps Setup switch.
• Switch 1 to 8 ON↔OFF to change the transmission distance for each channel.
SWITCH
Transmission distance(RG-59.)
OFF
100Mbps
Maximum transmission distance: 400m
((Default))
ON
10Mbps
Maximum transmission distance: 800m
※ The factory default is set to 100Mbps.
⑤
Coaxial LINK from Transmitter:
SC-IPT07P connection terminal (8 BNC ports).
⑥
Update port(manufacturer only):
product update terminal.
⑦
NVR side:
Connecting terminal to NVR or Network devices (1 RJ-45 port).
⑧
SFP:
Connecting terminal to NVR or Network devices using optical modules.
⑨
AC inlet:
AC power input terminal.
※ Only either NVR side(RJ45 port) or SFP port can be used. They cannot be used simultaneously.
⑤
⑥
①
⑦
②
⑧
⑨
③
④
