Release Version 1.1
3
-This device is a business grade electromagnetic wave device (Class A). The seller or user is advised to take note of this, and
the device is not intended for household use
■ Insulate the part where the cable connects to the connector so that the metal part is not exposed.
1. Introduction
1-1. Summary
This product consists of SC-IPT07P(transmitter), a 1-channel PoC-IP transmission device (Power over Coaxial), and
SC-IPR0708H(8-channel receiver) for EoC(Ethernet over Coax) with Switch HUB function.
The SC-IPR0708H can supply both the transmitter and the IP camera with power via the existing coaxial cable.
It also receives the video signal from the IP camera and transmits multi-channel IP camera data to the NVR port.
This can drastically reduce construction and installation costs and time.
1-2. Product Features
• Power and data transmission via 1 coaxial cable
• Remote transmission of network data via an RG-59 coaxial cable (full duplex)
- 100Mbps: Maximum 400m
- 10Mbps: Maximum 800m
• Built-in 10 / 100Mbps setting switch to optimize the transmission bandwidth according to distance
• 8-channel receiver with switching HUB function
-Provides RJ-45, SFP ports (choose 1)
• Safe power transmission through automatic line diagnosis
• PoE ON / OFF switch mounted on the transmitter
• Installation costs are reduced by using the existing coaxial cables.
• The PoC (Power Superimposition) function is installed, eliminating the need to install power lines, reducing
installation cost and construction time.
• MULTICAST support
• Built-in overvoltage protection circuit
2. Product composition
SC-IPR0708H
Power cord
User guide
Bracket/Screw
SC-IPT07P(8EA)
RJ-45 cable
Mounting bracket
