Release Version 1.1
2
■ When thunder or lightning strikes, please pay attention to the safety and unplug the power cord.
Caution
(Failure to follow any of the following guidelines could result in personal injury
or property damage.)
■ Avoid installing near strong magnetic fields or radio waves and wireless devices such as radio or TV.
- Install in a place that is free from magnetic, radio, or excessive vibration.
■ Proper ambient temperature and humidity are recommended.
- Avoid extremely high temperatures (above 50°C) or low (below -10°C), and humid conditions.
■ Do not place heavy items on the product or let foreign substances enter inside the device.
- It may cause failure.
■ Install the device in a well-ventilated place and avoid direct sunlight or heating devices.
■ Install in a flat and stable place. Do not use an upright or inclined position.
- It may not work properly or it may be dangerous due to the device falling.
■ Strong shock or vibration may cause device failure. Be careful when using the device.
- Install the device in a location free from strong vibration.
■ If you notice any unusual noise or smell, unplug the power supply immediately and contact the place of
purchase or service center.
- There may be a risk of fire and electric shock.
■ Rotate the air properly in the system operating room and secure the cover of the main body.
- It may be the cause of failure by environmental factors.
■ Contact the service center and have them checked regularly to keep the system working.
- We are not responsible for any damage caused by carelessness of the user.
■ Make sure the power cord is plugged into a grounded electrical outlet.
- There is a risk of electrical shock and personal injury.
■ Place the power plug in a location that is easy to operate.
- If a product fault has occurred, the power plug must be pulled out in order to switch off the device
completely. The power switch on the main housing does not completely cut off the power supply.
■ When this device is used near devices that generate strong radio waves, such as Radio devices
(TRANCEIVER, walkie-talkie, etc.), repeaters, etc. this can affect the video signal and abnormalities such as
noise or cracks appear on the device. Do not use it, as this may cause the device to malfunction.
■ Please be careful not to change the cable connection.
■ When installing the product on a rack, be sure to install it separately from the equipment installed above
and below.
-If there is no space for heat to be released between the products, equipment failure may occur due to heat saturation.
-The life of the product may be shortened due to an increase in the internal temperature of the product.
■ UTP(Unshielded Twisted Pair) Cable is for indoor use only. Use a STP(Shield Twisted Pair) Cable which is
shielded for outdoor use.
■ Transmission distance may vary depending on the type of UTP cable.
■ Refer to this user guide for any issues and enquiries. If you need professional assistance, please contact
the place of purchase or our service center.
■
Class A equipment (commercial broadcasting and communication equipment)
