Seed Pli Mg, User Manual

Page: 7 / 26

Removing the Softshell
The Softshell can be released from the chassis by simultaneously
pressing in the two safety buttons on the fitting installations and
lifting up. (8,7)
Preparing for use as a pushchair
WARNING! The seat is not suitable for children under 6 months.
WARNING! The mattress must be removed before using as a
pushchair.
• The Softshell is placed with the two green comfort-grips
facing the handlebar. (9,7)
• When you hear a clearly audible click from the fitting installa-
tions, the Softshell is locked onto the chassis. (7)
WARNING! Check that the Softshell’s securing mechanism is
activated correctly.
• Zip the hood onto the end where the two comfort-grips are
situated.
• Adjust the chassis to the sitting angle by releasing the two
green comfort-grips simultaneously and tip the Softshell up. (9)
• Fold out the footrest which is situated inside the end of the
Softshell. (11)
• Form the seat by pulling up the two red nylon straps inside the
Softshell.
• The nylon straps are pulled out over the Softshell’s chassis
and fastened to the two posts on the side of the
chassis. (12)
• Push the two-part bottom into place and the seat is ready for
use. (11,12)
• The backrest angle can be adjusted with the strap on the
Softshall
The Softshell can also be fitted to face the opposite direction so
the child is facing the handlebar by fitting it with the two green
comfort-grips facing away from the handlebar.