Seed Pli Mg, User Manual

Page: 6 / 26

Preparing the chassis
• Place the chassis on edge with the wheels towards you and
hold the handlebar. (1)
• If your stroller is fitted with swivel wheels, the wheels must be
in “locked” position.(24)
• Take hold of the wheels and pull them outwards to each side. (2)
• Pull the rear axle casing in towards yourself to the locked
position, when you hear a clearly audible click from each side,
the wheels are locked. (3)
• Place the chassis so that it is standing on its wheels. (4)
• Apply the brake. (15)
• Pull the handlebar up until it locks and you hear a clearly audible click
on both sides.(5)
• Adjust the handlebar with the help of the green grip to the
height that you require. (13,6)
• If your stroller is fitted with swivel wheels, the wheels can now
be unlocked. (23)
Preparing for use as a pram
• Place the Softshell with the two green comfort-grips under
the chassis turned towards the handlebar. (9)
• When you hear a clearly audible click from the assembly
fittings on both sides, the Softshell will be locked onto the
chassis. (7)
WARNING! Check that the Softshell’s securing mechanism is
activated correctly.
• The hood is fitted by first zipping it on from the left side (seen
from the pushing direction) and clicking the two grey plastic
fasteners onto the Softshell’s chassis. (19)
• Fit the cover by zipping it on from the right side (seen from the
pushing direction).
• The reclining angle can be adjusted by using the two comfort-
grips at the same time. (9)