Seed Pli Mg, User Manual

Page: 9 / 26

When using as a pram, the hood can be fitted by first zipping it on
from the left side (seen from the pushing direction) and clicking
the two grey plastic grips onto the side of the Softshell. (19)
When using as a pushchair, the hood is fitted in the same way to
the other end of the Softshell.
How to brake your Seed Pli (15)
When you press the brake pedal down; located at the rear of the
chassis you lock the rear wheels so that your Seed Pli cannot move.
When you want to release the wheels, press up on the underside of
the pedal.
WARNING! Never use the brake while the pram/stroller is moving.
How to fold your Seed Pli
• Apply the brake. (15)
• If your stroller is fitted with swivel wheels, the wheels must be
in “locked” position. (24)
• Remove the Softshell by pressing in the two safety buttons on
the side of the assembly installation. The chassis should be
horizontal. (8)
• Release the green adjuster grip on the handlebar and push it in
as far as it will go.(6)
• Release the two green and two red grips at the same time and
fold the diagonal tube down to the bottom chassis. (16,17,5)
• Stand the chassis on edge with the wheels towards yourself. (2)
• Release the rear axle-casing by pressing it forward. (22)
• Pull the wheels in to the bottom chassis. (1)
• Now the pram/stroller is folded together.
• Tie the safety strap behind the brake pedal at the rear of the
chassis.
You can fix the Softshell onto the closed chassis by clicking it
onto the two internal pegs on the inner side of the diagonal tube
to the underside of the fitting installation.