background image

 

 

7

 

 

 

 

Horizontal Resolution 580 TV Lines 

Clear image quality has been achieved by employing a SONY CCD with 410,000 (effective) pixels, 

which provides a horizontal resolution of 580 TV lines. 

 

DAY & NIGHT

 

This camera has a function that automatically selects the mode that is appropriate for daytime or 

night-time conditions. The COLOUR mode operates in daytime conditions to provide optimum 

colours, and BW mode operates in nighttime conditions to enhance the definition of the image. 

 

Electronic IRIS 

The electronic IRIS function enables continuous automatic control of the shutter between 

1/60~1/120,000 seconds. 

 

PRIVACY Function 

The PRIVACY function conceals the areas you do not wish to appear on the screen. 

 

3Axis built-in Vandal Resistant Dome Housing 

 

High Sensitivity 

The built-in high sensitivity SONY COLOUR CCD enables a clear image even in 0.05Lux or as low 

as 0.0002Lux with SENS-UP. 

 

s

DNR (Digital Noise Reduction) 

The amount of low illuminance noise has been significantly reduced, and the signal-to-noise ratio 

(S/N ratio) as well as horizontal resolution have been improved, resulting in a clear and sharp 

image display even in the dark. 

 

Controlled by OSD Menu 

The camera can be controlled by selecting text displayed on the monitor screen. 

 

Additional Functions 

SENS-UP, MOTION DETECTION, MIRROR, SHARPNESS and SYNC (INT/LL) functions are also 

available. 

 

1. Features 

Summary of Contents for VSXR-581DV


























Reviews: