Figure 36 - alarm Configuration
27 | SecurityMan
to figure 36 and figure 37 below for more detail explana-
tions.
Relative
alarm Configuration
Explanations:
buzzer
Select this option to enable and utilizes the computer’s
built-in buzzer so that when motion alarm triggers or there
is a shortage in hard drive spaces, the built-in buzzer in the
computer will output a loud beeping/buzzing sound. The
buzzer time can be setup between 5, 10, and 20 seconds of
intervals.
Disk Shortage alarm
If the hard drive’s available percentage space is less than
the set value percentage value, the buzzer will beep and/
or email the system administrator. This is
buzzer
and
au-
toMail
dependent, meaning the
buzzer
and/or
autoMail
has to be selected/checked, see
buzzer
explanation above
and
autoMail
below for better understanding. Disk short-
age alarm setting ranges from 0%, 25%, 50%, and 75%.
The default percentage is set to 25%.
Pre-alarm Record
Select Pre-Alarm Record will enable alarm recording prior
to the actual alarm event(s). For example if pre-alarm
record is enable and set to 15 seconds and the motion
alarm events happens at 10:30:30am, then SuperDVR will
start the event recording at 10:30:15am which has a pre-
alarm recording of 15 seconds before the actual event
10:30:30am. Pre-Alarm Record ranges from 5, 10, 15, 20,
30, 45, & 60 seconds.
Motion Holding Time
Motion sensor may detectt some movement, only if the
movement lasts for a period exceeding the default time,
then the alarm record will begin, buzzer will beeps and/or
AutoMail will triggers email(s). Motion holding time ranges
from 10, 15, 20, & 30 seconds.
alarm output Function Configuration
The
alarm output
features video loss, disk alarm, and
motion1~4. Each
alarm output
can be configured to
trigger the buzzer and to trigger AutoMail. If Video loss
is enabled whenever there is a video loss, short in the
video signals or sometimes known as line of integrity, the
computer built in buzzer will buzz and AutoMail will send
triggers to send out emails with pictures attachment to
the recipient.
Disk alarm
can be setup to alert via buzzer
or email once SuperDVR detects there is a shortage in
disk space at certain setup percentage.
Motion1~4
can
