28
• • Adding Cameras
To add a camera to your system, simply highlight any of the
available cameras/channels (unlocked) and press the
OK
button
on the receiver. Once selected, a confirmation screen will pop
up asking you to confirm (
YES
) or cancel (
NO
) your selection,
use the
LF
and
RT
buttons to make your selection and press the
OK
button to confirm. During the registration process a pop up
window showing “
Add/Remove Camera
” will be displayed for
approximately 10 seconds. At this time press the pairing button
located on the back of the camera a few times until you get a
confirmation stating that “pairing was successful”.
NOTE:
When adding a camera, the pair button located on the
back of the camera must be consecutively after pressing the
OK button on the DVR/Receiver. There is a 10 second grace
period for adding cameras, if pairing is unsuccessful before the
10 second grace period has expired than a pop up displaying
“
operation failed
” will appear. Pairing must be done within 20 ft
from the receiver.
Summary of Contents for DigiairWatch SM-816DT
Page 36: ......
