27
• Auto Scan
Auto Scan
is used to set up an automatic camera rotation period
between cameras 1-4 (when applicable). To do so, simply highlight
and press
OK
on
Auto Scan
. Use the
Up
and
Down
buttons to make
your selection and press the
OK
button to save your changes. Options
include:
Never
(default),
5 seconds
,
10 seconds
,
15 seconds
, and
20
seconds
.
NOTE:
You can manually toggle between cameras 1-4 by pressing the
Camera button on the receiver. During “single channel live view”, the
DVR will not toggle if the user is utilizing the manual recording feature
and will only record the current camera being displayed during
motion detection recording.
• Add/Remove Camera
The
Add/Remove Camera
option is used to add/remove cameras to
or from your DVR/Receiver. Camera 1 – 4 shown in the image below
represent all the channels available on your system (a
LOCK
symbol
represents a camera that is already registered to that channel and
an
UNLOCK
symbol represents an available channel that is free). To
access these options simply highlight and push the
OK
button on the
Add/Remove Camera
option.
NOTE:
By default the camera(s) that come with your DigiairWatch kit
are paired/registered in sequence from Camera 1 ~ 4.
Summary of Contents for DigiairWatch SM-816DT
Page 36: ......
