v1.0 6/21/11
9
KEYBOARD MENU CONTROL:
Parameter Setup
Joystick Calibration
Camera Setup
Camera Scan Setup
Camera Pattern Setup
Camera Tour Setup
Protocol Setup
Pelco Matrix Model Setup
By pressing and holding the
MENU
key for 2 seconds the main menu screen (as above)
will appear. The user must enter the main menu and either use the menu item number or
joystick to select the desired menu item. Once done, move the joystick right or press
ENTER
to enter that menu.
To move to a previous menu item press the
PREV
key or move the joystick left.
To
save
a menu setting selection press the
ENTER
key. The LCD screen will then display
“Success”.
Keyboard Parameter Settings:
Keyboard Camera ID Setup; Keyboard Baud Rate
Setup; Keyboard Information Display.
Keyboard Camera ID Setup:
o
Press the
MENU
key and select
1. Keyboard Setup
from the main menu.
The Keyboard Setup Menu screen similar to the one below will appear.
Press the
1
key for
Set KB ID
. Press
1
again and the LCD screen will display:
o
Press
1
to select the keyboard ID setting. Use the numeric keys to select
the ID from 1 to 64 (if the selected ID is greater than 64 “Error” will be
displayed). Then press the
ENTER
key to save. Upon doing so “Success”
will appear on the screen.
o
To move to the previous menu press the
PREV
key or move the joystick
to the left.
o
NOTE: The keyboard ID default is
1
.
1. Keyboard Setup
2. Dome Setup
3. Protocol Select
4. Exit Menu
1. Set KB ID (1-64):
2. Set Baudrate: 2400bps
3. Joy Calibrate
4. About Keyboard
1. Set KB ID (1-64):
