v1.0 6/21/11
7
KEYBOARD OPERATION:
LCD Screen
Joystick
Camera Address
PTZ Camera Lens Control
Setting Preset Scan, Pattern, Cruise Functions
Call Camera Main Menu
Matrix Control
Change Monitor
LCD Screen:
The LCD displays key information including camera address or ID, monitor
address or ID, protocol, baud rate and joystick position. When an operation is initiated the
LCD will be lit and remain on for 10 seconds after the operation is completed.
Joystick:
The joystick controls both camera positioning and camera menu selection and
setup.
Camera Positioning:
The camera will follow the joystick’s direction. The joystick
and camera’s position will be displayed on the LCD as
Camera Menu Setup:
The joystick is used to selection menu items as follows:
for the upper menu item,
for the next menu item,
for a sub menu or save and
for cancel, return to submenu or exit.
Camera Address:
To choose the camera to operate use
N
+
CAM
where
N
is the camera
address (e.g., 1). Enter camera address then press
CAM
.
PTZ Camera Lens Control:
Use the ST-PTZMINI-KB to control the camera’s Zoom,
Focus and Iris lens features.
Zoom:
Control the zoom by rotating the joystick – clockwise to zoom far, counter
clockwise to zoon wide.
Focus:
Press the
FAR
key to focus far objects. Press the
NEAR
key to focus near
objects. Normally Zoom and Focus will be adjusted automatically by the camera.
Iris:
Press the
OPEN
key to open the iris. Press the
CLOSE
key to close the Iris.
Pressing these keys will manually adjust the iris. Note: Many cameras do not
support manual iris control.
Setting Camera Presets, Scan, Pattern and Cruise Functions:
Preset:
o
To
create
a preset move the camera to the desired point, press the
SET
key, the
N
key (where
N
is the preset number) and the
PRE
key (
SET
+
N
+
PRE
).
o
To
adjust
the preset press the
N
key and the
PRE
key (
N
+
PRE)
.
Scan:
o
To set the
left
border, press the
SET
key,
1
key and
SCAN
key (
SET
+
1
+
SCAN
).
o
To set the right border, press the
SET
key,
2
key and
SCAN
key (
SET
+
2
+
SCAN
).
o
Start: To start the Left – Right scan press the
1
key and
SCAN
key (
1
+
SCAN
).
