v1.0 6/21/11
8
o
Enter the camera’s menu to change the scan speed.
Pattern:
o
To
create
a pattern press the
SET
key, the
N
key (where
N
is the number
to designate a pattern scan), the
PATTERN
key
then direct the camera
along the path for the pattern
the press the
SET
key, the
0
key then the
PATTERN
key (
SET
+
N
+
PATTERN
+
camera path
+
SET
+
0
+
PATTERN
). Note: up to 4 patterns can be created and stored (N will be
designated 1, 2, 3, or 4).
o
To
star
t a pattern scan,
input the pattern number 1, 2, 3 or 4
then press
the
PATTERN
key to commence scanning. (
enter 1, 2, 3, or 4
,
+
PATTERN
).
Tour:
o
To start a cruise press the
N
key, then the
TOUR
key.
N
represents the
desired tour number and
TOUR
will start the cruise (
N
+
TOUR
).
o
If only one cruise has been created then simply press the
TOUR
key.
Call The Camera’s Main Menu:
Press
9
+
5
+
PRESET
. The camera’s menu will be
displayed on the monitor.
Matrix Control:
A matrix can support a specific number of PTZ cameras. The
ST-PTZMINI-KB can support up to 16 PTZ cameras in a matrix. All camera information
such as address, data, and time will be displayed when switching from one camera to
another. Note: the user should refer to the matrix switch’s manual regarding the matrix’s
specific features, functions and limitations.
Switch Camera Order:
Press the
PREV
key to switch back to the previous
camera. Pressing and holding the
PREV
key for 2 seconds will allow switching
backwards through all cameras. Press the
STOP
key to stop switching. Press the
NEXT
key to advance to the next camera. Pressing and holding the
NEXT
key for
2 seconds will allow switching forwards through all cameras. Use the
STOP
key to
stop the switching.
Call Matrix Main Menu:
To call the matrix switch menu press the
SHIFT
and
SET
keys (
SHIFT
+
SET
). The menu will be displayed on the monitor.
Confirm Matrix Programming:
Refer to the matrix switch’s manual regarding
how to program the matrix. Press the
ENTER
key to confirm a program setting.
Change Monitor:
To change image to a different monitor press the
N
key (where
N
is the
monitor ID) and the
MON
key (
N
+
MON
).
