v1.0 6/21/11
10
Keyboard Baud Rate Setting:
o
Press the
MENU
key and select
1. Keyboard Setup
from the main menu.
The Keyboard Setup Menu screen similar to the one below will appear.
o
Press the 2 key and the select baud rate setting screen similar to the one
below will be displayed.
o
Move the joystick right or up/down to select the desired baud rate then
press
ENTER
to save. Upon doing so “Success” will appear on the
screen.
o
To move to the previous menu press the
PREV
key or move the joystick
to the left.
o
NOTE: If the PTZ controller is connected to a matrix switch the baud rate
must be 9600bps. If several controllers are to be used together the baud
rate must be 9600bps or 19200bps.
About Keyboard:
o
Press the
MENU
key and select
1. Keyboard Setup
from the main menu.
The Keyboard Setup Menu screen similar to the one below will appear.
o
Press the
4
key to display keyboard information.
Joystick Calibration:
With the joystick in the center position press the
MENU
key and the
1
key to select keyboard setup. Then select
3. Joy Calibrate
from the Keyboard Setup
Menu. Note: the joystick must remain in the center (neutral) position when calibrating.
1. Set KB ID (1-64):
2. Set Baudrate: 2400bps
3. Joy Calibrate
4. About Keyboard
1. Set KB ID (1-64):
2. Set Baudrate: 2400bps
3. Joy Calibrate
4. About Keyboard
2. Set Baud Rate: 2400bps
