V2.0 06/13/13
6
High Speed Dome
Ver
:
2.20
PELCO D/P
BPS
:
2400
ID
:
001
Tile Ref OK
Pan Ref OK
SONY FCB-EX480CP
6. FUNCTIONS and OPERATION
Basic Operation
After powering up the ST-PTZ550-
27’s version number,
communication protocol, baud rate and address will be
shown on the monitor. At the same time, the system will
check the pan and tilt status and display the results. The
information will disappear once operations begin.
The table below is a quick guide to the camera’s basic operations using a PTZ Controller:
Function
Operation
Pan/Tilt
Move joystick to left, right, up, and down
Menu Confirmation
Press [OPEN]
Menu Cancellation
Press [CLOSE]
Zoom Out
Press [TELE] or rotate joystick clockwise for the desired image.
Zoom In
Press [WIDE] or rotate joystick counter clockwise for the desired image.
Focus Far
Press [FAR] until there is a clear image
Focus Near
Press [NEAR] until there is a clear image
Auto Focus
The dome is in the auto focus mode when the joystick is moved left, right, up, down or turned.
For manual focus press any key.
Enter Programming
Menu
Call preset 95 or user defined preset. Please refer to short-cut menu.
Return Zero Pan/Tilt
Point
Call preset 34 or user defined preset. Please refer to short-cut menu.
Start Pan Scan
Call preset 99 or user defined preset. Please refer to short-cut menu.
Auto Flip
Call preset 33 or user defined preset. Please refer to short-cut menu.
Pan Scan Limit
Left limit: Call preset 92 or a user-defined preset. Please refer to short-cut menu.
Right limit: Call preset 93 or a user-defined preset. Please refer to short-cut menu.
Call Tour 1
Call preset 96 or a user-defined preset. Please refer to short-cut menu.
Call Tour 2
Call preset 97 or a user-defined preset. Please refer to short-cut menu.
Call Tour 3
Call preset 98 or a user-defined preset. Please refer to short-cut menu.
Call Camera Mode 1
Call preset 100
Call Camera Mode 2
Call preset 101
Call Camera Mode 3
Call preset 102
Privacy Zone
Able to edit 4 areas as privacy zones to protect individual privacy. Please refer to