ST-HDC8 QUICK START GUIDE
18
Network settings must be properly configured before you
can use the
DVR over
a
network.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
Figure 3. 13
Network Settings
2.
Select the
General
tab.
3.
In the
General Settings
interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4
Gateway, MTU and DNS Server.
If
a
DHCP server is available, you can check the
DHCP
checkbox
to automatically obtain an IP address
and
other network settings from that server.
4.
After having configured the general settings, click the
Apply
button to save.
3.8
Adding IP Cameras
Purpose:
Before you can get live video or record video files, you should add the network cameras to the connection list of
the
DVR
.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been activated.
Steps:
1.
Select the
Add IP Camera
option from the right-click menu in live view mode or click Menu> Camera>
Camera to enter the IP camera management interface.
