ST-HDC8 QUICK START GUIDE
17
Figure 3. 11
Hint Box
4.
Click
OK
.
5.
Click
Apply
to save the settings.
Note:
Each two video channels are grouped in sequence, e.g., CH01 and CH02, CH03 and CH04, etc., and the two
channels in the same group must be connected with the same type of video source, i.e., the analog or
HDC-TVI
or AHD video input.
In the live view interface, when there is no video signal of the analog channel, the corresponding
video signal
type message can be displayed on the screen.
3.6
Using the Setup Wizard
The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard starts
once the device has loaded.
Check the checkbox to enable Setup Wizard when device starts. Click
Next
to continue the setup wizard. Follow
the guide of the Setup Wizard to configure system resolution, system date/time, network settings, HDD
management, record settings, etc.
Figure 3. 12
Wizard
3.7
Network Settings
Purpose:
