ST-HDC8 QUICK START GUIDE
16
3.5
Configuring the Signal Input
After the startup and login, the device system enters the Wizard for configuring the signal input.
Steps:
1.
Check the checkbox to select different signal input types: TVI, AHD/CVBS or IP.
2.
Click
Apply
to save the settings.
Figure 3. 9
Configure Signal Input Type
Note:
You can also click Menu > Camera > Signal Input Status to configure the signal input.
Steps:
1.
Enter the
Signal Input Status
interface.
Menu > Camera > Signal Input Status
2.
Check the checkbox to select different signal input types: TVI, AHD/CVBS or IP.
Figure 3. 10
Configure Signal Input Type
3.
Check the checkbox of
Enhanced TVI 720p Compatibility
to enable the compatibility of TVI 720p signal
input. The hint box pops up if you check the checkbox.
