Agility 3 User Manual
Page 23
To listen in or talk:
1.
From the Operations/Acknowledge menu, press
[6]
. The following messages are
announced:
“To Listen In press 1, To Talk press
[2]
, To Listen and Talk (Open channel) press
[3],
To return to the previous menu, Press
[
]
.”
2.
Select the desired option.
3.
Press
[
]
to end listening in and talking communication and return to the
Operations menu.
Bi-directional Audio Options after an Alarm
In the event of Burglary, Fire and Medical alarms, the
Agility
is able to report these events
and then stay on the line. This allows the monitoring service to perform Voice Alarm
verification, verify the alarm or Verification in order to verify a cause of event or guide
someone in distress.
Service call
The Service Call feature enables you to call the Monitoring Station by pressing a key. To
establish the service call, press the button on the main unit or press simultaneously the
buttons
on the bi-directional keypad.
Note:
The Service call should be defined by your installer.
3.2 SMS Operation
SMS Remote Control
The
Agility
enables you to perform remote control operations using simple SMS
commands. The following section describes the SMS commands and the response of the
system to these commands.
Note:
This application is available only if a GSM/GPRS module is installed in your system.
Operation
SMS Message Structure
Example
Arm all partitions
of a user code
[Code] A
1234A
Arm all partitions
to Stay/Home
Arming
[Code] H
1234H
Disarm all
partitions of a user
code
[Code] D
1234D
Arm by partition
[Code] A [Partition No.]
1234A1
Stay/Home arm by
[Code] H [Partition No.]
1234H1
Summary of Contents for Agility 3
Page 1: ...User Manual 9313 1881 ...
