Agility 3 User Manual
Page 19
2.3 Sending a Panic Alarm
Panic alarms enable you to send a message to the monitoring station in the event of an
emergency, send a message to a follow me number, announce a local message or activate a
local alarm. Panic alarms can be set to be silent (Refer to your installer for more
information).
To send a Panic
Alarm using
Procedure
Press both
and
keys simultaneously
Press both
and
keys simultaneously
Note
: Your installer should define these keys to be set as panic
keys. These keys can be either disabled or used to
establish a service call to your Monitoring Station.
If defined by your installer pressing
simultaneously for 2 seconds will send a fire alarm and
pressing
simultaneously for 2 seconds will
send a special emergency or medical alarm.
Press the small blank button (if defined)
Note:
Your installer can define the small blank button to be used
for sending a panic alarm.
Note:
For full capabilities of the 2-way remote control, the bi-directional keypad and 4
button key fob, refer to the instructions supplied with each product.
Press both keys simultaneously
Press the panic button
Summary of Contents for Agility 3
Page 1: ...User Manual 9313 1881 ...
