JPEG2000 DVR User Guide
-48-
[SPEED SETUP]
Press
(( to select and [+] / [-] to change the value.
1.[PAN SPEED]
Set the PAN speed (left to right).
2.[TILT SPEED]
Set the TILT speed (up and down).
3.[ZOOM SPEED]
Set the speed of ZOOM IN/OUT.
4.[FOCUS SPEED]
Set the speed of FOCUS NEAR/FAR.
4
-6-4 Spot Monitor Setup
1.[SWITCHING INTERVAL]
Set the interval of sequence display in full mode
2.[ALARM POP-UP]
Set On/OFF the second monitor output once alarm is triggered.
3.[MOTION POP-UP]
Set On/OFF the second monitor output once motion is triggered.
4.[EVENT POP-UP DURATION]
Set the pop-up screen duration.
4-6-5 Audio setup
1.[CH]
To select audio channel to edit.
2.[REC]
To set record on / off on the designated channel.
3.[PLAY]
To set audio on / off during playback of the designated channel.
Note: the DVR will not play or record AUDIO under the following conditions:
1. The recording resolution is configured to QUAD mode in [RECORD CONFIGURATION].
2. The MUTIPLEX mode is configured to TRIPLEX in [RECORD CONFIGURATION].
3. Playback is in rewind or fast forward. The DVR plays AUDIO only when playback is moving forward and at
1X speed.
4. The DVR does not transmit AUDIO to the client via the client software or via IE.
