JPEG2000 DVR User Guide
-39-
4-3-8 Password setup
The password consists of 1 to 8 digits. Press the number keys on the front panel to
enter the password. You can use any combination of the numbers from 1 to 10.
1.[USER ID]
Press
or ( to set User ID.
2.[USER PW]
Key in the current password.
3.[NEW PW]
Key in the new password.
4.[CONFIRM PW]
Enter the new password again for confirmation.
The three user levels have different authorities to operate the DVR.
Change Settings Clear HDD Change Password Playback & Search Remote Access
Admin
○
○
○
○
○
Manager
○
○※
○
User
○
○
(
※
Can change M anager’s and User’s password.
4-3-9 System information
Shows the system information and its status.
S/W version: Indicates the firmware version
H/W version: Indicates the PCB version
Product ID: Indicates the product ID number
MASTER: Indicates the information of MASTER HDD
SLAVE: Indicates the information of SLAVE HDD
Default password:
ADMIN: (blank) / MANAGER: “1” / USER1: “2” ~ USER8: “9”
The product ID is not the DVR’s MAC address. MAC address can be found in
[EXTERNAL DEVICE]
＞
[TCP/IP setup].
