JPEG2000 DVR User Guide
-42-
4-4-2 Schedule record
Allows you to program a recording schedule throughout the year.
MODE
: Press MODE to select an editing mode. Use the direction keys
to
move the cursor, and then press [+] and [-] to select a recording mode.
The editing modes are as below:
TIME CELL: Program the schedule at a two-hour interval.
TIME ZONE: Program the schedule by time zone. There are 12 Time
Zones in the setting. A time zone is a two-hour interval from Sunday to
Saturday.
WEEK: Program the schedule day by day.
ALL: The DVR records at one recording mode, 24 hours a day, 7 days a
week.
CLEAR ALL: Clear all the schedule settings
NEXT: Go to the next page. The first page is from 00-12, and the
second page is from 12-24.
Set up a recording mode:
A- ALARM REC / M- MOTION REC / C- CONTINUOUS REC
---: No schedule recording
A--
: Set as Alarm record. When there is an alarm trigger, the DVR records at
the speed set in RECORD IN ALARM.
-M-
: Set as Motion record when there is motion detected, the DVR records at
the speed set in RECORD IN MOTION.
--C
: Set as Continuous record. The DVR records continuously at the speed set
in CONTINUOUS RECORD.
AM-
: Set as Alarm+Motion record. The DVR records at the speed set in
RECORD IN ALARM when there is an alarm triggered, and at the speed set in
RECORD IN MOTION where there is motion detected.
A-C
: Set as Alarm+Continuous record. The DVR records continuously at the
speed set in CONTINUOUS RECORD, and switches to the speed set in
RECORD IN ALARM when there is an alarm triggered.
-MC
: Set as Continuous record. . The DVR records continuously at
the speed set in CONTINUOUS RECORD, and switches to the speed set in
RECORD IN MOTION when there is motion detected.
Time Cell
Time Zone
Week
1. If the DVR is set to MOTION RECORDING and the DVR keeps recording continuously or is
not triggered to record as you expect, please check the sensitivity settings and the motion
mask setup in CONFIGURATION
＞
CAMERA SETUP
＞
MOTION SETUP.
2. If the motion settings are too sensitive, you may want to lower the sensitivity level and define
a motion detection area for more accuracy. If the motion is not triggered per your expectation,
you may want to increase the sensitivity level, clear the motion mask, or enlarge the
detection area.
