Step 3
Adjust the lens to get the clear monitor video. Use cross-head screwdriver to
loosen the screw and then turn the camera body to the proper position man-
ually. Fix the screw again.
Important
Do not remove the screw. Loosen a little bit. Please secure after you have
completed the setup.
Step 4
Line up the bulge of the decoration ring to the nick of the camera body and
install along the tilt installation. Push and then turn decoration ring clock-
wise. The installation completed after you secure the decoration ring. You
need to use the proper tool to open up the side port of the U-cable channel
of the decoration ring if you want to draw out the cable from the side port of
the cable channel when you are installing the device cable. And then you can
draw out the cable from the cable channel of the pedestal. Finally you can
install the decoration ring to complete the installation.
Cross-head Screwdriver
Adjustment Screw
