HDCVI Plastic Housing
Step 1
Please take the installation position map in the accessories bag, and then
paste it on the ceiling or the wall according to your monitor area require-
ments. Draw and then dig three holes in the installation surface and then
insert three expansion bolts in the holes. Secure these three bolts firmly.
Step 2
Turn counter clockwise to remove the decoration ring. Please dig a “cable
exit hole” in the surface according to the installation position map if you
want to draw out the cable from the top of the installation surface. You need
to draw out the cable from the cable channel side port of the pedestal if you
want to draw out the cable from the side port of the cable channel. Adjust
the device installation pedestal to the proper position and then draw the
cable through the cable exit. Line up the three screw holes in the installation
position. Put the three self-tapping screws in the three plastic expansion
bolts firmly. Now the dome camera is secure in the installation surface.
3.2
Ceiling or Wall
Expansion Bolt
Dome Camera Body
ST3 Self-tapping Screws
Decoration Ring
