When the Standard definition/high definition switch control cable is short
circuit, systems outputs standard definition video. Otherwise, when the cir-
cuit is open, system outputs the high definition video.
3
Dome Installation
Important
Before the installation, please make sure the installation surface can sustain
at least 3X weight of the bracket and the camera.
3.1
HD-CVI glass housing
The dome camera usually uses the ceiling installation. It can be installed on
the ceiling or the wall.
•
For the side exit cable installation, please make sure the side exit cable
direction is the same as shown in the installation position map.
•
Before you secure the screws on the pedestal, please put the cable
through the cable exit of the pedestal.
•
Before you complete the installation and debug, do not remove the
electrostatic film. After you remove the film, do not touch the enclo
sure in case there are any scratches.
Ceiling or Wall
Installation Position Map
Expansion Bolts
Self-Tapping Screw
Enclosure fastening screw
Inner Hex Wrench
