Securiton ASD 531, Technical Description

Page: 90 / 105

Operation
90 / 105 ASD 531, Technical description, T 140 416 en
Continuation:
G10, smoke sensor events
001 Smoke sensor alarm
002 Smoke sensor dust
004 Smoke sensor dirt
008 Pre-signal 1 smoke sensor
016 Pre-signal 2 smoke sensor
032 Pre-signal 3 smoke sensor
G11, smoke sensor faults, part 1
001 ASD <> smoke sensor communications
002 Unknown smoke sensor type, smoke sensor
004 Response sensitivity too low, smoke sensor
008 Invalid parameters, smoke sensor
G12, smoke sensor faults, part 2
001 Smoke sensor measuring chamber
002 Temperature, smoke sensor
004 Supply voltage, smoke sensor
008 EEPROM access error, smoke sensor
016 EEPROM invalid data, smoke sensor
032 Manufacturing, smoke sensor
G13, isolate smoke sensor
001 Isolated smoke sensor alarm
002 Isolate smoke sensor switched on
004 Isolate smoke sensor switched off (normal operation)
008 Isolated pre-signal 1, smoke sensor
016 Isolated pre-signal 2, smoke sensor
032 Isolated pre-signal 3, smoke sensor
G14, test trigger from BasiConfig
001 Alarm test
002 Fault test
004 Pre-signal 1 test
008 Pre-signal 2 test
016 Pre-signal 3 test
G30, airflow monitoring sampling pipe
001 Pipe blockage, sampling pipe
002 Pipe breakage, sampling pipe
004 Invalid LS-Ü parameters, sampling pipe
008 Air flow sensor, defective / missing
G50, fan faults
001 Tacho signal missing
002 Motor regulation outside range
G60, initial reset faults
004 Initial reset time-out
008 Invalid parameters for initial reset
G70, RIM faults
001 RIM fault, lacking or defective
064 Incompatible RIM fault
128 RIM fault, too many RIMs
G71, XLM faults
016 XLM fault, lacking or defective
064 XLM fault, too many XLMs
G73, SD memory card faults
001 SD memory card fault, missing or defective