Securiton ASD 531, Technical Description

Page: 89 / 105

Operation
ASD 531, Technical description, T 140 416 en 89 / 105
8.5.4.2 Event groups
Event group Purpose
G00 General events, part 1 (ASD On/Off, inactive, start initial reset, smoke sensor on/off from FACP)
G01 General events, part 2 (time, clear event memory)
G03 General events, part 3 (configuration change)
G04 General events, part 4 (reset events)
G10 Smoke sensor events (alarm, dust/dirt, pre-signals, alarm 2)
G11 Smoke sensor faults, part 1 (communication to ASD)
G12 Smoke sensor faults, part 2 (smoke sensor events)
G13 Isolate smoke sensor (On/Off, test results)
G30 Airflow monitoring sampling pipe (pipe blockage, pipe breakage, LS-Ü parameters, air flow sensor def./lacking)
G50 Fan faults (tacho signal, regulator, current consumption)
G60 Initial reset faults (various initial reset parameters, initial reset time-out , airflow too low)
G70 RIM faults
G71 XLM faults
G73 Memory card faults
G80 AMB faults (undervoltage, clock)
G81 Operating system faults
8.5.4.3
Event codes within event groups
G00, general events, part 1
001 Switch on ASD (supply voltage)
002 Initial reset carried out (ASD)
004 ASD switched off (inactive, via “External reset”)
008 ASD switched on (via “External reset”)
016 Smoke sensor switched off from FACP (SecuriFire – Integral)
064 Smoke sensor switched on from FACP (SecuriFire – Integral)
G01, general events, part 2
001 Date, time set
016 Event memory deleted
G03, general events, part 3, configuration changes
000 X01 015 W01 023 W09 031 W17 039 W25 047 W33 055 W41
001 X02 016 W02 024 W10 032 W18 040 W26 048 W34 056 W42
002 X03 017 W03 025 W11 033 W19 041 W27 049 W35 057 W43
003 A11 018 W04 026 W12 034 W20 042 W28 050 W36 058 W44
005 b11
007 b21
009 C11
011 C21
013 C31
G04, general events, part 4, reset results
001 Key
002 SecuriLine
008 External
