INSTALLATION
INSTALLATION PRECAUTIONS:
1. The Securview™ SV-6912.IR is designed to be mounted up high on the vehicle. Make sure
there will be adequate space to mount the camera.
2. Make sure to double check that the camera will not be blocking any brake lights or turn
signals on the vehicle.
3. Make sure that there is adequate space behind the mounting location so that a hole can be
drilled for routing the camera wire harness into the vehicle.
MOUNTING:
1. Locate a suitable place to mount the camera.
2. Remove the assembly screws from the SV-6912. This will allow the camera and mounting
bracket to be separated.
3. Once you have the Mounting Bracket in a suitable location, Screw it down to the mounting
surface you have chosen. (Make sure to double check behind your drilling location for
clearance)
4. Locate a suitable place to drill a hole to route the camera wiring harness into the vehicle.
5. Route the harness through the hole. Seal the hole the rubber grommet provided on the
camera wiring harness. Squeeze the grommet tightly into the hole so that no water can leak
through.
6. Reassemble the Camera to the Mounting Bracket.
SIDE
VIEW
Mounting
Surface
Mounting
Screw
Rubber Grommet
Cable
SV-6912 Camera
Mounting Bracket
Camera
Mounting
Screw
Mounting
Screw
Assembly
Screw
Assembly
Screw
CAMERA:
1. This color CCD camera is maintenance-free, waterproof (IP-68) and vibration resistant.
2. This camera is completely electronic. There are NO manual adjustments for focus, etc.
3. This camera is equipped with Night Vision to give you better lighting at night time. This plus
the vehicle’s reverse light and the ambient lighting in the area should make it perfect for night
time driving.
