Remove the faceplate from the doorbell
camera by pulling out from the bottom
edge.
Tuck the wiring into the recessed gap
in the center of the mounting plate and
wall, then place the doorbell camera in
position on the mounting plate.
Insert the two doorbell screws into
the mounting holes in the doorbell
and tighten to fix the doorbell to the
mounting plate.
(Optional) Insert a MicroSD card into
the MicroSD card slot on the side of the
camera.
The card will be formatted during the
add camera process.
Place the faceplate back on the doorbell
camera.
Locate the two tiny security screws and
carefully insert them one at a time into
the bottom of the faceplate, tightening
with the special screwdriver bit included
in the accessory kit.
Summary of Contents for OKO DB3A
Page 1: ...Quick Start Guide POWERED BY OKO 3MP DOORBELL CAMERA DB3A ...
Page 2: ......
Page 11: ......
Page 12: ......