SECURENET OKO DB3A, Quick Start Manual

Page: 10 / 12

Turn the AC power back on at the
mains power box.
The doorbell camera will power up
and is ready to add in the app.
Connecting to the camera
In the app, go to the Video or Settings > Video settings page and tap the circular
“+” button to launch the camera installation wizard.
Follow the instructions in the app to connect the camera to your account and
configure the network settings.
Resetting the camera
If you change your Wi-Fi network or for some other reason you cannot connect to
the camera, you will need to reset it.
Using the included screwdriver, carefully remove the two security screws at the
bottom of the faceplate, then remove the faceplate. Press and hold the Reset
button for 10 seconds.
In the app, go to the Settings > Video settings page and select the camera. Update
the Wi-Fi settings to re-establish a connection to the camera.