Nnn-0000nn
© Copyright 2017 SecureALL Corporation
Page
12
of
18
22.
Mount the back mounting plate (Figure 31). Attach with four screws. For improved
fire safety, a fire barrier caulk, such as 3M's CP 25WB+, can be injected into the large
upper hole.
Figure 31
23.
Remount the pushbar unit on the door. Slide the non-latch side into the mounting
bracket at the far end (Figure 32) and push the latch side onto the spindle that extends
from the back mounting plate (Figure 33).
Figure 32 Figure 33
24.
Screw the lever end of the pushbar unit to the door as shown in Figure 34 and tighten
the screws that attach the rear bracket to the door. Replace the endcap over the rear
bracket (Figure 35).
Spindle
Rear
bracket
Attach back
mounting plate
