Seco Smarc SM-B69 User Manual Download Page 44 | Manualshive

Page: 44 / 73

background image

SM-B69

SM-B69 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author:A.R - Reviewed by M.B. - Copyright © 2020 SECO S.p.A.

44

Allowed groupings

Lane #0

Lane #1

Lane #2

Lane #3

1 PCI-e x 4 port

2 PCI- e x2

1 PCI-e x 2 + 2 PCI-e x1

4 PCI-e x1

Please also be aware that this grouping cannot be changed dynamically, it is a fixed feature of the BIOS.
The customer in phase of order must select what grouping to have for PCI-e lanes.

3.2.1.14

Gigabit Ethernet signals

Gigabit Ethernet interface is realized on SM-B69 module by using an Intel I210 Ethernet contoller, which is interfaced to Intel processor through a PCI interface.
Here following the signals involved in Gigabit Ethernet #0 management:
GB/GBE0_MDI0-: Media Dependent Interface (MDI) Transmit/Receive differential pair
GB/GBE0_MDI1-: Media Dependent Interface (MDI) Transmit differential pair
GB/GBE0_MDI2-: Media Dependent Interface (MDI) Transmit differential pair
GB/GBE0_MDI3-: Media Dependent Interface (MDI) Transmit differential pair
GBE0_LINK_ACT#: Ethernet controller activity indicator. Active Low Output signal, +3.3V_ALW electrical level
GBE0_LINK100#: Ethernet controller 100Mbps link indicator. Active Low Output signal, +3.3V_ALW electrical level
GBE0_LINK1000#: Ethernet controller 1Gbps link indicator. Active Low Output signal, +3.3V_ALW electrical level
GBE0_SDP: Software defined pin, directly managed by Intel® Ethernet Controller I210 for Gigabit Ethernet #0
Here following the signals involved in Gigabit Ethernet #1 management:
GB/GBE1_MDI0-: Media Dependent Interface (MDI) Transmit/Receive differential pair
GB/GBE1_MDI1-: Media Dependent Interface (MDI) Transmit differential pair
GB/GBE1_MDI2-: Media Dependent Interface (MDI) Transmit differential pair
GB/GBE1_MDI3-: Media Dependent Interface (MDI) Transmit differential pair
GBE1_LINK_ACT#: Ethernet controller activity indicator. Active Low Output signal, +3.3V_ALW electrical level
GBE1_LINK100#: Ethernet controller 100Mbps link indicator. Active Low Output signal, +3.3V_ALW electrical level

«
...
42
43
44
45
46
...
»

Summary of Contents for Smarc SM-B69










































































Reviews:

No comments

Related manuals for Smarc SM-B69

Brand: UE Pages: 4

Concord express

Brand: GE Pages: 3

Brand: Panasonic Pages: 45

Brand: Barco Pages: 6

Brand: Samson Pages: 40

Brand: L-Acoustics Pages: 24

Brand: L-Acoustics Pages: 21

Brand: M&S Systems Pages: 4

Brand: WAGNER Pages: 60

Brand: cinetto Pages: 56

Brand: Warner Electric Pages: 4

Liquitron DP5000-01A

Brand: LMI Technologies Pages: 28

Brand: Motrona Pages: 10

PSS67 IO1 16FDI

Brand: Pilz Pages: 36

Brand: TWR Lighting Pages: 49

Brand: Sherlotronics Pages: 2

PersonalWorkplace Pro Video

Brand: G&D Pages: 56

Brand: Beninca Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands