SECO-LARM ENFORCER EV-N1506-2W4Q, Web Manual

Page: 19 / 29

ENFORCER IP Fixed Cameras
SECO-LARM U.S.A., Inc. 19
Remote Setting – Network – IP Filter:
Remote Setting – Network – RTSP:

Enable – Select to enable IP filtering (restrict access to camera based on IP addresses)

Enable Allow List – List devices that are allowed

Enable Block List – List devices that are blocked

Restricted Type – View allow or block list

Start Address – Enter starting IP Address

End Address – Enter ending IP Address

Single Add – Add a single address

Network Segment Add – Add a scope of IP addresses

Refresh – Reloads initial values

Save – Click to save changes

Delete – Remove IP Address from list

RTSPEnable – Select to enable real time streaming protocol (RTSP is a protocol used to stream media across ethernet networks)

Anonymous Login – Select to allow users with no credentials

Refresh – Reloads initial values

Save – Click to save changes