SECO-LARM ENFORCER EV-N1506-2W4Q, Web Manual

Page: 14 / 29

ENFORCER IP Fixed Cameras
14 SECO-LARM U.S.A., Inc.
Remote Setting – Network – General:
Remote Setting – Network – General – PPPoE:

DHCP – Select to enable DHCP (Automatically receives an IP
address and populates the rest of the network settings)

IP Address – Enter the IP address

Subnet Mask – Enter the subnet mask

Gateway – Enter the gateway

DNS 1 – Enter the primary DNS

Enable PPPoE – Select to enable PPPoE (Point-to-Point Protocol over
Ethernet)

Username – Enter username

Password – Enter password

IP Address – Uses current IP Address

Subnet Mask – Uses current subnet mask

Gateway – Uses current gateway

DNS1 – Uses primary DNS

DNS2 –
Specify secondary DNS

Refresh – Reloads initial values

Save – Click to save changes

DNS 2
– Enter the Secondary DNS

Multicast – Select to enable camera to use multicast address

Multicast Address – Enter the multicast address

Refresh – Reloads initial values

Save – Click to save changes