SECO-LARM ENFORCER EV-N1506-2W4Q, Web Manual

Page: 12 / 29

ENFORCER IP Fixed Cameras
12 SECO-LARM U.S.A., Inc.
Remote Setting – Record – Encode:
Remote Setting – Record – Record:
Rec. Parameters

Stream Mode – Select between Mainstream and Sub stream to record

Record – Enable/Disable recording

PreRecord – Enable/Disable PreRecord (This always caches a few seconds of video)

Netbreak – Enable/Disable Netbreak

Refresh – Reloads initial values

Save – Click to save changes
Set the values below for MainStream, SubStream, and MobileStream

Resolution – Set camera resolution

FPS – Set frames per second (1~20)

Video Code Type – Select compression (H.264, H.265)

Video Code Level – Main profile selected on Mainstream

Bitrate Control –
Select constant bitrate or variable bitrate (CBR, VBR)

Bitrate Mode –
Select bitrate mode

Pre-defined – Select from pre-defined values
o
User-defined – Enter user-defined value
o
I Frame Interval – Enter I frame interval (1~80)

Refresh – Reloads initial values

Save –
Click to save changes