ENFORCER IP Fixed Cameras
SECO-LARM U.S.A., Inc.
15
Remote Setting – Network – General – SNMP:
Remote Setting – Network – General – Port Configuration:
Enable –
Select to enable simple network management protocol
(SNMP is used to collect ad manage data from managed devices on
your network)
SNMP Version
–
Select version of SNMP to use (v1, v2, v3)
SNMP Port –
Enter port
Read Community –
Enter read community string
HTTP Port –
Number of the http port
Client Port –
Number of the client port
RTSP Port –
Number of the real time streaming port
HTTPS –
Number of the https port
Multicast Port –
Number of the Multicast port
UPNP –
Enable / Disable UPNP
Mapping Strategy –
Choose port mapping strategy
o
Auto –
Automatically fills the port numbers
o
Manual –
Allows you to specify port numbers
P2P Switch –
Select to enable P2P
Refresh –
Reloads initial value
Save –
Click to save changes
Write Community –
Enter write community string
Trap IP Address –
Enter trap IP Address
Trap Port –
Enter port
Refresh –
Reloads initial values
Save
–
Click to save changes
