Setting the zero point
To set the correct starting point for cutting, use the arrow keys to move the cutter head to the
desired position and confirm the origin by pressing the Enter key.,
Cutting test
● First, move the cutter head to a suitable position for the test cut while in offline mode.
● Confirm the zero point by pressing the
Enter
key
● To execute the cutting test, press the
Test
key. The flatbed vinyl cutter will start off by
grooving a diamond with its creasing tool, around which a rectangle will be cut in the
second working step.
● This cutting test allows you to check the knife holder setting and length setting of the
creasing tool as well as the respective contact pressures.
● Press the left and right arrow keys to modify the contact pressure of the knife holder while
in online mode
● To modify the creasing tool's contact pressure, press the set button and Speed1 as well as
Force1 will appear on the display. Here, too, press the left and right arrow keys to modify
the contact pressure. Press the
F2
key to immediately return to the online mode.
Processing of non-printed media
With one tool
● Start the cutting software DrawCut PRO.
● Make sure the device is in the online mode.
● Also ensure that the parameters for contact pressure, speed and knife offset are set
correctly.
● Position the media on the work surface.
● Activate the vacuum pump by using the F1 key.
● Position the knife at the desired location and use the Enter key to define the origin.
● Create a logo or a graphic using the text tool and click on the knife holder icon in the menu
bar above.
● The menu "Send to vinyl cutter" appears, click on "Cut" in the lower right section of the
window.
● Now, the "Vinyl spooler" opens and displays a preview of the cut job on the right side. Now
click on "Cut" and confirm the question with "Yes".
● Start the cutting process!
With two tools
● Start the cutting software DrawCut PRO.
● Make sure the device is in the online mode.
● Also ensure that the parameters for contact pressure, speed and knife offset are set
correctly.
● Position the media on the work surface.
● Activate the vacuum pump by using the F1 key.
Secabo GmbH | Hochstatt 6-8 | 85283 Wolnzach | Germany | [email protected] | www.secabo.com
12
